EM-Tec field and lab sampler kits and boxes

Introduction

The EM-Tec field and lab sampler kits consist of a pin stub, a mounted EM-Tec high purity adhesive carbon tab and an EM-tec SB type storage tube. The pin stub with the adhesive carbon tab are stored in the cap of the storage tube.  To protect the adhesive carbon tab against contamination, the carbon tab remains covered with a protective foil (remove plastic cover prior to use). The EM-Tec sampler kits are also available with a non-conductive adhesive tab.
The EM-Tec sampler kits are ideal for collecting powders, fibers, fragments, small particles, etc. on the adhesive, conductive carbon tab for subsequent analysis with SEM/EDS system or with a light microscope.

Application fields for EM-Tec SEM field sampler kits are:

  • Asbestos analysis
  • Environmental and forensic sampling
  • Collection of fibres
  • Particle sampling
  • Collection of paint chips or glass fragments
  • Collection of filter residues
  • Powder samples
  • Gunshot residue (GSR) collection

Sampling is best done with the pin stub still in the plastic cap; remove the protective plastic cover from the adhesive tabs just before use. Replace the clear tube directly after sampling. For placing the pin stubs in the SEM, it is highly recommended to use the EM-Tec SEM pins tub grippers which are specifically designed to handle the pin stubs.

Availability and capacity of the EM-Tec SEM and LM field sampler kits and boxes with conductive tabs:

Product # Type Capacity Stub Ø Stor. tube Tab type / Ø Pin length
15-008201 EM-Tec FS1 Single 12.7mm EM-tec SB2 Carbon / 12mm Standard 8mm
15-008210 EM-Tec FS10 Box / 10 12.7mm EM-tec SB2 None Standard 8mm
15-008212 EM-Tec FS12 Box / 10 12.7mm EM-tec SB2 Carbon / 12mm Standard 8mm
15-008202 EM-Tec FS2 Single 25.4mm EM-Tec SB3 Carbon / 25mm Standard 8mm
15-008220 EM-Tec FS20 Box/10 25.4mm EM-Tec SB3 None Standard 8mm
15-008225 EM-Tec FS25 Box/10 25.4mm EM-Tec SB3 Carbon / 25mm Standard 8mm
15-008301 EM-Tec FS1Z Single 12.7mm EM-tec SB2 Carbon / 12mm Short 5.9mm
15-008310 EM-Tec FS10Z Box / 10 12.7mm EM-tec SB2 None Short 5.9mm
15-008312 EM-Tec FS12Z Box / 10 12.7mm EM-tec SB2 Carbon / 12mm Short 5.9mm
15-008302 EM-Tec FS2Z Single 25.4mm EM-Tec SB3 Carbon / 25mm Short 5.9mm
15-008320 EM-Tec FS20Z Box/10 25.4mm EM-Tec SB3 None Short 5.9mm
15-008325 EM-Tec FS25Z Box/10 25.4mm EM-Tec SB3 Carbon / 25mm Short 5.9mm
15-008601 EM-Tec LM1 Single 12.7mm EM-tec SB2 Non-cond. / 12mm Standard 8mm
15-008610 EM-Tec LM11 Box / 10 12.7mm EM-tec SB2 Non-cond. / 12mm Standard 8mm

Products

View cart “EM-Tec LM1 sampler with Ø12.7mm pin stub and Ø12mm non-conductive tab in a SB1 storage tube” has been added to your cart.

Showing all 14 results